Placing A Call With The Car Kit - Motorola WIRELESS CAR KIT WITH BLUETOOTH HF850 Manual

Automatic Connection
After initial pairing, every time you start your vehicle,
your phone and car kit will automatically be connected
(if your phone's relevant settings are not changed and it
is in poweron mode). When the wireless connection is
established, the Multi-function button stays lighted.
If your phone is powered off when you start your vehicle,
the Bluetooth connection may not be automatically
established when you turn on your phone.
To manually establish the connection:
1 Turn on the phone.
2 Press the Multi-function button. The Multi-
function button begins to flash, and the car kit attempts
to connect to your phone.
If the wireless connection is established, the
Multifunction button will stop flashing and stay
lighted.
If the connection is not established in 1 minute, press
the Multi-function button again to restart the paging.
Placing a Call with the Car
Kit
You can place a call with the car kit in these ways:
• Dial a number from the phone.
• Press the Voice Dial Button and follow the
phone's instructions for voice dialing.
11