Playing The Cd -- Normal Play/Shuffle Play/Repeat Play; Other Operations - Sony XE270 Operating Instructions Manual

Playing the CD
–– Normal Play/Shuffle Play/Repeat
Play
This unit lets you play the CD in different play
modes.
1
Press PLAY MODE repeatedly until the
mode you want appears.
Select
To play
CONTINUE
The CD in the original order.
SHUFFLE
The tracks on the CD in random
order.
PROGRAM
The tracks on the CD in the
order you want them to be
played (see "Programming the
CD tracks" on page 12).
2
Press H.
Tip (CDP-XE570/XE370 only)
You can select the playing mode by pressing
CONTINUE, SHUFFLE, or PROGRAM on the
remote.
Repeat Play Operations
You can play the CD tracks repeatedly in any
play modes.
To activate the Repeat Play function, press
REPEAT until "REPEAT' appears in the
display.
Press REPEAT
To
Until "REPEAT 1" appears
Repeat only one track
while playing the track you
want to repeat.
Until "REPEAT" or
Cancel Repeat Play
"REPEAT1" disappears.
When you are in the Repeat Play function, the
player repeats the tracks as follows:
The player repeats
When the disc is
played in
All the tracks
Continuous Play
All the tracks in random
Shuffle Play
order
The same programme
Programme Play
(page 12)

Other Operations

Do this
To
Press x.
Stop playback
Press X. Press X again or
Pause
H to resume play.
Select a track During play or pause, turn
lAMSL clockwise
(to go forward) or
counterclockwise (to go
backward)
(or press >( to go
forward) or . (to go
backward) on the remote
(CDP-XE570/XE370
only)).
Press the number button on
Select a track directly
the remote.*
Press and hold M or m
Find a point in a track
during playback, and
release at the desired point.
Press PLAY MODE until
Play tracks in random
"SHUFFLE" appears in the
order
display.
Press AOPEN/CLOSE.
Remove the CD
Press ANALOG OUT
Adjust the volume
LEVEL +/– on the remote.
* When you directly locate a track numbered over 10,
press >10 first, then the corresponding number
buttons. To enter "0," use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
Tips
• You can adjust the analog output level with the
ANALOG OUT LEVEL +/– on the remote (page 7)
(CDP-XE570/XE370 only).
• You can adjust the headphones volume on the
remote. To adjust the volume, connect the
headphones to the PHONES jack and adjust the
volume with the ANALOG OUT LEVEL +/– on
the remote (CDP-XE570 only).
• If there is no CD in the player, "–NO DISC–" (or
"no dISC" for the CDP-XE370/XE270) appears in
the display.
Note
If "– OVER –" (or " " for the CDP-XE370/
XE270) appears in the display, the disc has reached
the end while you were pressing M. Press m or
turn lAMSL counterclockwise to go back.
9
GB