Checking The Remaining Recordable Time - Sony RCD-W1 Operating Instructions (primary manual) Operating Instructions Manual

Checking the remaining
recordable time
When you placed an unfinalized CD-R or CD-
RW in the DECK B, you can also check the
remaining recordable time. The information
appears as follows:
When using the remote, set SELECT to CDR
for operations on DECK B.
The total track number and total playing time are
displayed
The total track number and the remaining
recordable time are displayed
On the TOC and CD-R/RW
indicator
The CD-R/RW indicator shows which type of
recordable disc is in DECK B, and whether the
recordable disc has been already finalized.
The CD-R/RW indicator
The CD-R/RW indicator
When you put an unfinalized CD-R disc in the
disc tray, the CD-R/RW indicator lights up as
"CD-R."
When you put a CD-RW disc in the disc tray,
the CD-R/RW indicator lights up "CD-RW,"
and it does not matter if the disc has not been
finalized.
The TOC indicator
When you put an unfinalized CD-R disc in the
disc tray, the TOC indicator lights up.
When you put an unfinalized CD-RW disc in
the disc tray, the CD-R/RW indicator lights up.
For details on finalizing, refer to page 20, and page
21 for unfinalizing.
Tip
Whenever you change the operation status of the
recorder, the display automatically changes to reflect
that status. For example, if you change to CD
playback, details about CD playback, such as track
number and playing time of the current track, will
automatically appear.
Note
When you put a CD or finalized CD-R disc in a disc
tray, the CD indicator lights up as "CD."
The TOC
indicator
9