Locating a Particular
Point in a Track
You can also use the m and M buttons to
locate a particular point in a track during
playback or playback pause.
When using the remote, set SELECT to CD for
operations on DECK A, or to CDR for
operations on DECK B.
AMS ./>
m/M
To locate a
Press and hold
point
While
During playback, press AMS
.(backward) > (forward) (or
monitoring the
sound
press m or M on the remote
repeatedly) and hold until you find
the point.
Notes
• If the disc reaches the end while you are pressing
AMS > or M on the remote during sound
monitoring, the recorder stops.
• Tracks that are only a few seconds long may be too
short to scan using the search function. For such
tracks, it is better to play the disc at normal speed.
Playing Tracks
Repeatedly (Repeat Play)
You can play tracks repeatedly in any play
mode.
Before using the remote, set SELECT to CD
for operations on DECK A, or to CDR for
operations on DECK B.
REPEAT
1
Each time you press REPEAT on the
remote, the REPEAT indicator in the
front panel display lights and toggles
as "REPEAT," "REPEAT 1," and then
lights off.
The deck repeats the tracks as follows:
When the disc
The deck repeats
is played in
Normal play
All the tracks by "REPEAT".
(page 7)
One track repeat by "REPEAT 1"
All the tracks in random order by
Shuffle play
"REPEAT"
(page 12)
All the same Program by
Program Play
"REPEAT"
(page 12)
2
Press H.
To stop Repeat Play
Press x.
To cancel Repeat Play
Press REPEAT until the indicator disappears.
Note
You cannot use Repeat Play, when Relay Play is ON
(page 13).
11