Checking The Remaining Time Or The Playing Position; On The Recorder - Sony MZ-R90/R91 Operating Instructions Manual

Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback.

On the recorder

Jog lever
1
While the recorder is playing, press
the jog lever, flip until "DISPLAY"
flashes in the display, and then press
the lever again.
2
Flip the jog lever until the
information you want flashes in the
display.
Each time you flip the lever, the
display changes as follows.
Display window on the recorder
A
LapTime
1 Remain
AllRemain
RecDate
26
-GB
A
B
1)
B
1/4
2/4
3/4
4/4
1)
Of the figures in column B, the second
indicates the number of displayable items and
the first indicates the order of the selected
item.
For example, when "1/4" is indicated for
"LapTime", it means the first of 4 selectable
items is being displayed.
3
Press the jog lever.
The display changes as follows.
Display window on the recorder
A
Track number
1)
Track name
1)
Disc name
2)
Recorded date
1) Appears only if the track has been labeled.
2)
Appears only when the clock is set.
z
• If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 17.
• The display that appears on the remote control
is different from the ones on the recorder. See
"On the remote control" (page 27) to check
the display that appears on the remote control.
A
B
B
Elapsed time
Remaining time of
the current track
Remaining time
after the current
location
2)
Recorded time