Using The Remote Control; Setting Up The Infrared Remote Control Sensor; Installing The Remote Control Batteries - Acer DV555K User Manual

Using the Remote Control

Setting Up the Infrared Remote Control Sensor

Before using the infrared
remote control, the display's
remote control sensor must
be positioned. The remote
control sensor is the small
black box located on the
back of left side of the
display. Press
button near the base of the
remote control sensor, and
slide the sensor away from
the display until it locks in
place. Reverse
procedure
sensor to its original position.
Using the Remote Control
Point the remote control toward the display's remote
control sensor when making selections with the
buttons. The operating range of the remote control is a
distance of about 10m from the front of the remote
control sensor. The horizontal and vertical angles of
the remote control are approximately 30° within a
distance of about 10m.
The remote control may not function when direct
sunlight or strong illumination strikes the remote
control sensor or when there is an object in its path.

Installing the Remote Control Batteries

The remote control is powered by two 1.5V AAA
batteries.
To install or replace batteries:
1. Press and slide to open the cover.
2. Align the batteries according to the (+) and (–)
indications inside the case.
3. Replace the cover.
20 | Display Components
the small
this
to return the
CAUTION
55/65"
1
75"
2
3