Remote Control; General Functions - Acer DV420 User Manual

DV420 /DV460 /DV550
2.3.

Remote Control

2.3.1. General functions

POWER
1
SMART
2
3
ON/OFF
4
CONTRAST
5
DISPLAY
6
7
8
AUTO
ADJUST
MUTE
9
[POWER] button
1
Press to switch on the display from standby mode. Press
again to turn it off and back into standby mode.
[SMART] button
2
Press to activate Smart Menu. Press [
select menu options. Press [SET] button to confirm and exit
the selection.
• Standard: Used for normal images (factory setting)
• Highbright: Used for moving image such as Video
• sRGB: Used for text based images
[PIP] (Picture In Picture) button
3
[ON/OFF]: Turn PIP mode ON/OFF.
[INPUT]: Select the input signal for the sub-picture.
[CHANGE]: Toggle between the main picture and sub
picture.
[CONTRAST] button
4
Press to activate Contrast Menu. Press [ ] or [ ] button to
adjust the value. Press [MENU] button to confirm and exit.
6
10
VIDEO AUDIO
SOURCE SOURCE
11
12
PIP
INPUT CHANGE
13
BRIGHTNESS
14
15
MENU
16
SET
17
EXIT
18
VOL UP
19
20
VOL DOWN
] or [ ] button to
[DISPLAY] button
5
Press to turn on/off the information OSD displayed on the
upper right corner of the screen.
[ ] button
6
• Press to move the selection left in OSD menu.
• Press to decrease the value in OSD menu.
• Press to move the sub-picture left in PIP mode.
[SET] button
7
Press to activate the setting inside the OSD menu.
[AUTO ADJUST] button
8
Press to run the Auto Adjust function.
NOTE: This button is functional for VGA input only.
[MUTE] button
9
Press to turn the mute function on/off.
[VIDEO SOURCE] button
10
Press to toggle Video Source Menu. Press [
to select one of the video sources among Displayport,
DVI-D, VGA, HDMI, Component, Video, Press [SET] button
to confirm and exit.
[AUDIO SOURCE] button
11
Press to toggle Audio Source Menu. Press [
to select one of the audio sources among Displayport,
HDMI, Audio1, Audio2, Press [SET] button to confirm and
exit.
Picture Format button
12
Press to switch screen aspect ratio.
• For PC signal: FULL, NORMAL, CUSTOM, and REAL.
• For Video signal: FULL, NORMAL, DYNAMIC,
CUSTOM, REAL, and 21:9.
[BRIGHTNESS] button
13
Press to toggle Brightness Menu. Press [ ] or [ ] button to
adjust the value. Press [MENU] button to confirm and exit.
[ ] button
14
• Press to move the selection up in OSD menu.
• Press to move the sub-picture up in PIP mode.
[MENU] button
15
Press to turn the OSD menu on/off.
[ ] button
16
• Press to move the selection right in OSD menu.
• Press to increase the value in OSD menu.
• Press to move the sub-picture right in PIP mode.
[EXIT] button
17
Press to turn back to the previous OSD menu.
[ ] button
18
• Press to move the selection down in OSD menu.
• Press to move the sub-picture down in PIP mode.
[VOL UP] button
19
Press to increase the audio output level.
[VOL DOWN] button
20
Press to decrease the audio output level..
] or [ ] button
] or [ ] button