Hide thumbs Also See for D241H:

Advertisement

TABLE OF CONTENTS

Special notes on LCD monitors .................................................. 1
Information for your safety and comfort .................................. 2
Unpacking ................................................................................... 5
Attaching/Removing the base .................................................... 6
Screen position adjustment ........................................................ 6
Connecting the power cord ....................................................... 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC .............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................10
Installation.....................................................................................11
User controls..................................................................................12
Troubleshooting............................................................................19

Advertisement

Table of Contents
loading

Summary of Contents for Acer D241H

  • Page 1: Table Of Contents

    TABLE OF CONTENTS Special notes on LCD monitors ... 1 Information for your safety and comfort ... 2 Unpacking ... 5 Attaching/Removing the base ... 6 Screen position adjustment ... 6 Connecting the power cord ... 7 Safety precaution ... 7 Cleaning your monitor ...
  • Page 2: Special Notes On Lcd Monitors

    SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
  • Page 3: Information For Your Safety And Comfort

    Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible.
  • Page 4: Product Servicing

    Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: •...
  • Page 5: Taking Care Of Your Vision

    Warning! We do not recommend using the product on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. ----------------------------------------------------------------------------------------------------- For more information and help in recycling, please visit the following websites: Worldwide: http://www.acer-group.com/public/Sustainability/sustainability01.htm http://www.acer-group.com/public/Sustainability/sustainability04.htm EN-4...
  • Page 6: Unpacking

    UNPAC KI NG Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. LCD Monitor AC Power Cord User Manual Qwerty Remote Controller Battery x 2 D-Sub Cable...
  • Page 7: Attaching/Removing The Base

    Attaching / Removing the Base -------------------------------------------------------------------- Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. In stal l: Align the base with the stand and push the base towards the top of the monitor, Tighten the screw clock-wise.
  • Page 8: Connecting The Power Cord

    CONNECTING THE POWER CORD Check first to make sure that the power cord you use is the correct type required for your area. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet.
  • Page 9: Power Saving

    Power saving The monitor will be driven into Power Saving mode by the control signal from the display controller, as indicated by the amber-color power LED. Power Saving The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated.
  • Page 10: Connector Pin Assignment

    CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable DESCRIPTION Green Blue Monitor Ground DDC-Ground R-Ground G-Ground B-Ground 19-Pin color display signal cable* D ESCRIPTION TMDS Data 2+ TMDS Data 2 Shield TMDS Data 2- TMDS Data 1+ TMDS Data 1 Shield TMDS Data1- TMDS Data 0+ TMDS Data 0 Shield...
  • Page 11: Standard Timing Table

    Standard Timing Table Mode VESA SVGA SVGA VESA WXGA SXGA WXGA+ UXGA Resolution 640x480 640x480 66.66 720x400 800x600 800x600 1024x768 1024x768 1152x864 1280x800 1280x1024 1440x900 1920x1080 EN-10...
  • Page 12: Installation

    INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. HDMI Cable (Only HDMI-Input Model)(Optional) a.
  • Page 13: User Controls

    USER CONTROLS 1 2 3 4 5 6 Power Power Switch / Power LED: To turn the monitor ON or OFF. Lights up to indicate the power is turned ON. Using the Shortcut Menu Press the function button to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings.
  • Page 14 Empowering: Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. AUTO Auto Adjust Press this button to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.
  • Page 15: Operation Instructions

    Acer eColor Management Operation instructions Step 1: Press Key to open the Acer eColor Management OSD and “ ” access the scenario modes Step 2: to select the mode P ress “ ” “ ” Step 3: Press Adjust/Exit “...
  • Page 16: Adjusting The Osd Settings

    Adjusting the OSD settings -------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD Timeout and general settings.
  • Page 17 Adjusting the OSD Timeout 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. EN-16...
  • Page 18: Adjusting The Setting

    Adjusting the setting 1 Press the MENU key to bring up the OSD. 2 Using the keys, select the feature you wish to adjust. Use the page. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings.
  • Page 19: Product Information

    Product information 1920 x 1080 H: 67KHz V: 60Hz VGA Input S/N:ETL53091326350380B3742 1 Press the MENU key to bring up the OSD. 2 Using the keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. EN-18...
  • Page 20: Troubleshooting

    TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON LED OFF No Picture LED displays amber color Unstable Picture Display is missing, center...
  • Page 21: Declaration Of Conformity

    D241H SKU Number: D241H xxxxxx (“x” = 0~9, a ~ z, or A ~ Z) Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements.
  • Page 22 -. EN62311 l Article 3.1(b) EMC -. EN301 489-1 -. EN301 489-17 l Article 3.2 Spectrum Usages -. EN300 328 Year to begin affixing CE marking 2010. Jan. 22, 2010 _______________________________ Easy Lai /Manager Date Regulation Center, Acer Inc. EN-21...
  • Page 23: Federal Communications Commission

    Address of Responsible Party: 333 West San Carlos St. Contact Person: Phone No.: Fax No.: LCD Monitor Acer D241H D241H xxxxxx (“x” = 0~9, a ~ z, A ~ Z or Blank) Acer America Corporation San Jose, CA 95110 U. S. A. Acer Representative 254-298-4000 254-298-4147 EN-22 www.acer .com...
  • Page 24 Acer Display+ LCD Monitor Setup Guide...
  • Page 25 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
  • Page 26 Setting up To set up Acer Display+ as an independent display, please follow the steps below: Attach the base. Connect the Ethernet cable or configure your Wi-Fi settings. Connect external speakers (optional). Connect the power cord to the monitor, then to a properly grounded AC outlet.
  • Page 27 Overview Number Item Microphone Power button Shortcut buttons / Input button USB port 9 10 11 12 Description Internal microphone. Turns the device on and off. * Press for less than four seconds to go to sleep mode. * Press and hold for more than four seconds to turn the monitor off.
  • Page 28 Number Item Multi-in-1 card reader AC-in Mic-out Audio-out HDMI VGA-in USB port Audio-in Ethernet (RJ-45) port Type B USB port Description Accepts Memory Stick (MS), Memory Stick PRO (MS PRO), MultiMediaCard (MMC), Secure Digital (SD), and xD-Picture Card (xD). Connects to an AC adapter. Connects to the PC mic-in for microphone function in generic monitor mode.
  • Page 29 Remote control with QWERTY keyboard Shift Item Description Turns the device on and off. * Press for less than four seconds to go to sleep mode. Power key * Press and hold for more than 4 seconds to turn the monitor off.
  • Page 30 Widgets Your Acer Display+ monitor has built-in widget-based functions such as calendar, poster, weather, news, clock, audio/video, and digital photo frame function for browsing pictures even when the monitor is not connected to a computer. Note: For instructions on how to configure the settings for each widget, refer to Settings on page 16.
  • Page 31 To customize your layout: Press the Home key to open the widget toolbar on the right.. Use the up and down navigation keys to select a widget and press OK. Press OK to place the widget on your selected container. Note: To customize settings for each widget, click Settings.
  • Page 32 Note: You need to be connected to the Internet to be able to synchronize Google or Yahoo calendar in Acer Display+. You cannot set up a new Google or Yahoo account through Acer Display+, however, you can log in to your Google or Yahoo calendar using Acer Display+.
  • Page 33 Adding an event Click New Event and add the information needed on the pop-up window. Click Save to save the event. Deleting / modifying an event Select the event and click Delete on the pop-up window. To modify an event, select the event and modify the details on the pop-up window.
  • Page 34 News You can set up your news widget to show only the headline, or to show the headline and article. When showing only the headline: Press the right navigation key to go to the language page. Press the right navigation key again to go to the news source page. Select your preferred language and source, and press the left navigation key to go back to the main view.
  • Page 35 Photo Acer Display+ functions as a digital photo frame for browsing pictures and viewing slideshows from various sources — multi-in-1 card reader, media server, USB, Flickr, and Picasa. When setup as a small widget: Use the up and down navigation keys to navigate pictures in the same folder.
  • Page 36 Note: You need to be connected to the Internet to be able to synchronize your Flickr or Picasa account. Video Watch videos on the Acer Display+ monitor. When setup as a small widget: Use the up and down navigation keys to navigate videos in the same folder.
  • Page 37 When setup as a big widget: Use the up and down navigation keys to navigate videos in the same folder. Use the left and right navigation keys to switch folders. Click Source and select your video source. When in full screen mode: Use the left and right navigation keys to switch folders.
  • Page 38: Time And Date

    Music Use the up and down navigation keys to navigate music in the same folder. Use the left and right navigation keys to switch folders. Click Source and select your music source. Time and Date Use the left and right navigation keys to change time zones. Use the up and down keys to change cities.
  • Page 39 Settings Calendar You can set up your Google or Yahoo calendar on the Acer Display+. Click the Apply / Cancel button to apply or cancel your selected settings. Click Back to go back to the main view. Photo You can set up to five Picasa accounts and five Yahoo accounts, and configure the slideshow effect / time period for the photo slideshow.
  • Page 40 News The news widget is synchronized with Google news by default. You can also subscribe to other RSS feeds. Click the Apply / Cancel button to apply or cancel your selected settings. Press Back to go back to the main view. Poster You can view your Yahoo and Google mail inbox in the Poster widget.
  • Page 41 Press Back to go back to the main view. Network You can set up Acer Display+ to connect to the Internet via LAN or wireless network. Click the Apply / Cancel button to apply or cancel your selected...
  • Page 42 Time and Date You can set up your time and date based on the central time zones or manually. Click the Apply / Cancel button to apply or cancel your selected settings. Press Back to go back to the main view. Language You can choose your preferred language and keyboard layout under Language in the Settings page.
  • Page 43: Software Update

    Software update To update your software: Download the latest software code from http://csd.acer.com.tw and copy to a USB drive or an SD card. Insert the SD card and follow the instructions on the pop up window. Important: Do not turn the display off while the update is...

Table of Contents