Com (Rs-232C) Scanner - Casio V-REGI series Programming And Reference Manual

14.2 COM (RS-232C) Scanner

This section explains connection between a main unit and a RS-232C scanner.
Goes back to the home screen of Android OS.
1.
Turn the power of the main unit off.
2.
Connect a scanner.
3.
Remove the case on the back of main unit. Connect scanner (HHS18)
connecter to RS-232C port 2 or RS-232C port 3 and fix the connecter with
screws.
Perform device setting.
4.
Turn the main unit power on to start Cash register system.
① Sign on by maintenance clerk.
Tap [02] tab and [Maintenance] button.
② Boot [Control panel].
Tap [Maintenance] tab then boot control panel by tapping [Control panel] button.
③ Boot Cash Register System Setting.
Tap [Cash Register System Setting] button on "Control panel" screen.
CONTROL PANEL
④ Perform device setting on the scanner.
Tap [Not connect] button on [HHS18 scanner setting] of [Cash Register
System Setting] screens and select the port number that the scanner is
connected.
⑤ Update device setting
After connection destination is selected on [HHS18 scanner setting]
screen, use [Update] button to update the device.
！After the setting, application restart operation is necessary.
When you connect a RS-232C scanner to a main unit, be sure
to turn the mains power off.
Since the main unit supplies power to the scanner, a short
circuit may occur when you connect them while power is
turned on.
Cash Register System Settings
117