Selecting And Playing Groups (Group Skip Mode) - Sony MZ-B100 Operating Instructions (primary manual) Operating Instructions Manual

Selecting and playing groups
(Group skip mode)
When playing a disc with group settings,
the group skip mode allows you to jump
from the currently playing group to any
other group on the MD. The group skip
mode can be used at any time during
playback, regardless of whether the player
is in group mode on or not.
When the group mode is off:
Disc
Track number
5 6
1 2 3
Skip
When the group mode is on:
Disc
Group 1 Group 2
Track Track
number number
1 2 3 1 2
Skip
1
Insert a disc which has group settings
into the recorder and play the disc,
and then press GROUP slightly.
" " flashes in the display and the
group skip mode turns on.
2
Within 5 seconds, press
REVIEW/AMS
.
until your desired group appears, and
then press EDIT/ENTER.
The recorder starts playing from the
first track in the group.
7 8 4
Skip Skip
Group 3
Track
number
1 2
Skip Skip
CUE/AMS
/>
z
The group skip mode operates regardless of
whether the group mode is on or off.
Notes
• If no operation is performed within 5 seconds
after step 1, the group skip mode will be
canceled and you will not be able to perform
step 2 thereafter. To continue with step 1 at
this point, repeat from the beginning of the
procedure.
• The group skip mode cannot be used with a
disc that has no group settings.
31
-GB