Various Ways Of Playback; Changing The Sound Setting - Sony MZ-B100 Operating Instructions (primary manual) Operating Instructions Manual

Various ways of playback

Changing the sound
setting
You can select your desired sound when
playing.
This function is effective when
using the supplied headphones to
listen to stereo recordings.
SOUND
1
Press SOUND repeatedly.
Each time you press the button, A
changes as follows.
003
20:51
Sound setting
A
— (none) Factory setting
SOUND 1 Strong bass
(Digital Mega Bass 1)
SOUND 2 Stronger bass
(Digital Mega Bass 2)
1)
V-UP Enhancing voice clarity
(Voice Up function)
SOUND
A
1)
During stereo playback, the Voice Up function
emphasizes the left-right orientation of
individual voices, making them easier to
distinguish and hear. You cannot use the Voice
Up function when monaural recording.
To cancel the sound setting
repeatedly until nothing
Press SOUND
appears in the display
Notes
• The use of the Voice Up function is not
recommended when playing a music disc.
• You cannot set the Voice Up function on
monaural recording.
• If sound distortion occurs when you turn the
volume up while "SOUND 1" or "SOUND 2",
turn the volume down again or change the
play mode.
• The setting of "SOUND 1" or "SOUND 2"
does not affect the sound being recorded.
.
27
-GB