Supermicro X11QPH+ User Manual page 51

NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to
display network activity. Refer to the table below for pin defi nitions.
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable to pin 14 to
show hard drive activity status. Refer to the table below for pin defi nitions.
1 2
Power Button
Ground
Ground
Reset Button
3.3V
UID LED
3.3V Stby
3.3V Stby
3.3V Stby
3.3V
NMI
19 20
LAN1/LAN2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
9 NIC 2 Activity LED
11 NIC 1 Activity LED
HDD LED
Pin Defi nitions (JF1)
Pins Defi nition
13 3.3V Stdby
14 HDD Active
Power Fail LED
OH/PWR Fail/Fan Fail LED
1
NIC2 Active LED
2
NIC1 Active LED
3
HDD LED
PWR LED
Ground
51
Chapter 2: Installation
1. NIC2 LED
2. NIC1 LED
3. HDD LED