Supermicro X11QPH+ User Manual page 14

Hide thumbs Also See for X11QPH+:
Table of Contents

Advertisement

Super X11QPH+ User's Manual
Motherboard Features
CPU
Four Intel Xeon Scalable-SP (81xx/61xx/51xx series) and 2nd Gen Intel Xeon Scablable-SP (82xx/62xx/52xx series)
processors (P0); each processor supports three Intel® UltraPath Interconnect (UPI) links of up to 10.4 GT/s
Note: All CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 17 to determine which slots or devices may be affected.
Memory
Integrated memory controller supports up to 12 TB of DDR4 3DS LRDIMM/LRDIMM/3DS RDIMM/RDIMM ECC (288-pin)
2933/2666/2400/2133 MHz modules in 48 slots
Notes: 1. Up to 18 TB of memory is supported with DCPMM modules installed. 2. 2933 MHz memory is supported
by the 2nd Gen Intel Xeon Scablable-SP (82xx/62xx) series processors only.
DIMM Size
Up to 128 GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
Intel C621 PCH
Expansion Slots
WIO 2x16 (PCI-E 3.0) slot (for CPU2 Port1/ CPU2 Port2) (J18/J19/J20)
WIO x8 (PCI-E 3.0) slot (for CPU2 Port3)
Ultra IO x40 slot (for CPU1 Port3/CPU1 Port1/CPU1 Port2) (J21/J22/J23)
PCI-E 3.0 riser card slot with support of 56 lanes (for CPU2 Port3/CPU3 Port2/CPU3 Port3/ CPU3 Port1) (J26/J27)
PCI-E 3.0 riser card slot with support of 48 lanes (for CPU4 Port1/CPU4 Port3/CPU4 Port2) (J29/J30)
Network
One (1) IPMI Dedicated LAN located on the rear IO backpanel
BaseBoard Management Controller (BMC)
ASPEED AST 2500 (A2) Baseboard Controller (BMC) with IPMI 2.0 support
Graphics
Graphics controller via ASPEED AST 2500 (A2) BMC
I/O Devices
Serial (COM) Port
SATA 3.0
RAID (PCH)
Motherboard Features
One (1) Fast UART 16550 port on the I/O back panel
Eight (8) SATA 3.0 ports supported by Intel PCH (I-SATA 0-3, 4-7)
Four (4) S-SATA 3.0 connections (S-SATA 0-3) supported by Intel PCH
Two (4) S-SATA 3.0 with power-pins built with support of SuperDOM devices
(S-SATA4/S-SATA5)
RAID 0, 1, 5, 10
14

Advertisement

Table of Contents
loading

Table of Contents