Engine Oil Life Reset - Dodge Durango SRT 2018 Owner's Manual

Hide thumbs Also See for Durango SRT 2018:
Table of Contents

Advertisement

• Gear Selector Status (PRND)
• Selectable Information (Compass, Temp,
Range to Empty, Trip A, Trip B, Average Fuel
Economy, Current Fuel Economy)
The instrument cluster display will normally dis-
play the main menu or the screens of a selected
feature of the main menu. The main display area
also displays "pop up" messages that consist of
approximately 60 possible warning or informa-
tion messages. These pop up messages fall into
several categories:
• Five Second Stored Messages
When the appropriate conditions occur, this type
of message takes control of the main display
area for five seconds and then returns to the
previous screen. Most of the messages of this
type are then stored (as long as the condition
that activated it remains active) and can be
reviewed from the "Messages" main menu item.
Examples of this message type are "Right Front
Turn Signal Lamp Out" and "Low Tire Pressure."
• Unstored Messages
This message type is displayed indefinitely or
until the condition that activated the message is
cleared. Examples of this message type are
"Turn Signal On" (if a turn signal is left on) and
"Lights On" (if driver leaves the vehicle).
• Unstored Messages Until RUN
These messages deal primarily with the Remote
Start feature. This message type is displayed
until the ignition is in the RUN state.
• Five Second Unstored Messages
When the appropriate conditions occur, this type
of message takes control of the main display
area for five seconds and then returns to the
previous screen. An example of this message
type is "Automatic High Beams On."

Engine Oil Life Reset

Oil Change Required
Your vehicle is equipped with an engine oil
change indicator system. The "Oil Change Re-
quired" message will display in the instrument
cluster display for five seconds after a single
chime has sounded, to indicate the next sched-
uled oil change interval. The engine oil change
indicator system is duty cycle based, which
means the engine oil change interval may fluc-
tuate, dependent upon your personal driving
style.
Unless reset, this message will continue to
display each time you place the ignition in the
ON/RUN position. To turn off the message tem-
porarily, push and release the OK or arrow
buttons. To reset the oil change indicator system
(after performing the scheduled maintenance),
refer to the following procedure.
Vehicles Equipped With Keyless Enter-N-Go
— Ignition
Use the steering wheel instrument cluster dis-
play controls for the following procedure(s):
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the engine).
2. Push and release the down arrow button to
scroll downward through the main menu to
"Vehicle Info."
3. Push and release the right arrow button to
access the "Oil Life" screen.
4. Push and hold the OK button to reset oil life.
If conditions are met, the gauge and numeric
display will update to show 100%. If condi-
tions are not met a popup message of "To
reset oil life engine must be off with ignition in
run" will be displayed (for five seconds), and
the user will remain at the Oil Life screen.
5. Push and release the up or down arrow
button to exit the submenu screen.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator system
did not reset. If necessary, repeat this proce-
dure.
83

Advertisement

Table of Contents
loading

Table of Contents