Sony MCE-S78K Operating Instructions Manual page 6

Getting Started
z
If your TV or VCR has an S video input connector
Connect the component via the S VIDEO OUT
connector using the S video cable (not supplied). You
will get a better picture.
YC-15V (not supplied)
VIDEO CD player
S VIDEO
OUT
6
S video cable
TV
S VIDEO IN
ç
Important
Setting the color system switch
This player conforms to the NTSC and PAL color
systems. Set the COLOR SYSTEM switch on the rear
of the player to the appropriate position, according
to your TV.
If the color system of your TV is NTSC:
Set the COLOR SYSTEM switch to NTSC. Pictures
will not be displayed if you set the switch to PAL.
When you play a VIDEO CD recorded in the PAL
color system, the picture will be stretched
vertically and will be displayed with the lower
part of the picture cut off.
If the color system of your TV is PAL:
Set the COLOR SYSTEM switch to PAL. Pictures
will not be displayed if you set the switch to
NTSC. When you play a VIDEO CD recorded in
the NTSC color system, the picture will be
stretched horizontally and will be displayed with
the lower part of the screen masked in black.
If your TV automatically changes the color system
according to the input signal:
Pictures will be displayed with the switch set to
either NTSC or PAL.
If you set the COLOR SYSTEM switch to AUTO,
the player automatically changes the color system
of video output according to the color system of
the VIDEO CD to be played. In this case, the color
system selected remains until you unplug the
player, or you play another VIDEO CD with a
different color system. If you unplug the player,
the color system will be set to PAL automatically
when you turn on the player again.
Be sure to turn off and on the player when you
change the setting.
AUTO
NTSC
,
COLOR SYSTEM
PAL