Table of Contents
Advertisement
OMI Operations Manual: OMI6800 Series
SETTING COM1 FUNCTION
1. Using a #1 Phillips screwdriver, remove
the 2 Phillips screws indicated in the
figure.
2. Remove the storage cover by lifting it out
of the unit.
3. Using a #1 Phillips screwdriver, remove
the 1 screw retaining the storage bracket.
Then carefully slide the bracket out of the
unit.
4. The DIP switches are now visible.
5. Reference the "COM1 Function Switch
Setting" label and/or the following chart to
set the DIP switches to the desired RS-
232, RS-422, or RS-485 communication
mode.
6. Slide the bracket and storage device into
the OMI, securing it with the screw
removed in step 3.
OMI Operations Manual: OMI6800 Series
Function
(switches 1-5)
RS232 (Default)
RS422
RS485
S_422
S_232
(all switches)
OFF
ON
ON
OFF
ON
OFF
29
29
Advertisement
Table of Contents
