Operating Determinations - Omnitronic COMBO-150BT User Manual

3

OPERATING DETERMINATIONS

Power
The PA system can be operated with 115/230 V,
50/60 Hz mains voltage. The wireless microphones
operate with two 1.5 V AA batteries and the IR remote
control with a CR2025 button cell. The devices were
designed for indoor use only.
Public and Industrial Use
Operating an amplification system in public or industrial
areas, a series of safety instructions have to be
followed that this manual can only give in part. The
operator must therefore inform himself on the current
safety instructions and consider them.
Maximum Power
The maximum power of the PA system must never be
exceeded. When operating the speaker system, please
make sure that the loudspeakers always sound well.
When distortions can be heard, either the amplifier or
the loudspeaker is overloaded. Overloads can quickly
lead to amplifier or speaker damage. In order to avoid
damage, please reduce the volume immediately when
distortions can be heard. When speaker systems are
destroyed by overload, the guarantee becomes void.
Ambient Conditions
This device must never be operated or stockpiled in
surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity
can reduce the insulation and lead to mortal electrical
shocks. The ambient temperature must always be
between -5° C and +45° C. Keep away from direct
insulation (particularly in cars) and heaters. The relative
humidity must not exceed 50 % with an ambient
temperature of 45° C. This device must only be
operated in an altitude between -20 and 2000 m over
NN. When using smoke machines, make sure that the
device is never exposed to the direct smoke jet and is
installed in a distance of 0.5 meters between smoke
machine and device.
Installation
Do not shake the device. Avoid brute force when
installing or operating the device. When choosing the
installation spot, please make sure that the device is
not exposed to extreme heat, moisture or dust. There
should not be any cables lying around. You endanger
your own and the safety of others! This speaker system
must only be installed at a solid, plane, anti-slip,
vibration-free, oscillation-free and fire-resistant location.
Operate the device only after having familiarized with its
functions. Do not permit operation by persons not
qualified for operating the device. Most damages are
the result of unprofessional operation!
Transport
Please use the original packaging if the device is to be
transported.
Cleaning
Never use solvents or aggressive detergents in order to
clean the device! Rather use a soft and damp cloth.
Serial Barcode
Never remove the serial barcode from the device as
this would make the guarantee void.
Modifications and Guarantee
Please consider that unauthorized modifications on the
speaker system are forbidden due to safety reasons! If
this speaker system will be operated in any way
different to the one described in this manual, the
product may suffer damages and the guarantee
becomes void. Furthermore, any other operation may
lead to dangers like crashes, hearing loss etc.
Approval
This wireless system adheres to the R&TTE directive of
the European Union and does not need an individual
EC type examination of every member state. In all EU
member countries, the operation of this wireless system
is generally approved by the national telecom
regulatory authority. The system is license-free. In
some countries outside the EU, the operation of this
wireless system may needs to be approved by the
national telecoms regulatory authority
25
.