Operating Determinations - Omnitronic PMM-8 User Manual

Active studio monitorsa
Table of Contents

Advertisement

Available languages

Available languages

There are no serviceable parts inside the speaker-system. Maintenance and service operations are only to
be carried out by authorized dealers.

3. OPERATING DETERMINATIONS

This speaker-system is an active system which can be used for permanent installations or for mobile use.
Areas of use
This device is designed for private use and professional use, e.g. on stages, in discotheques, theatres etc.
This product was designed for indoor use only.
Electric connection
This product is allowed to be operated with an alternating current of 230 V, 50 Hz.
Installation
This speaker-system must never be operated or stockpiled in surroundings where splash water, rain,
moisture or fog may harm the speaker-system. When using smoke machines, make sure that the speaker-
system is never exposed to the direct smoke jet and is installed in a distance of 0.5 meters between smoke
machine and speaker-system.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
This speaker-system must only be installed at a solid, plane, anti-slip, vibration-free, oscilation-free and fire-
resistant location.
When using stands, holders, tables or carts for installing this speaker-system make sure that the speaker
can be installed safely in order to avoid injury or damage.
Please note: when using this speaker-system in public or industrial areas, a series of safety instructions
have to be followed that this manual can only give in part. The operator must therefore inform himself on the
current safety instructions and consider them.
Before installing the system, make sure that the installation area can hold a minimum point load of 5 times
the system's load (e.g. weight 20 kg - point load 100 kg).
The speaker-system must never be installed higher than 100 cm without secondary attachment.
For overhead use (mounting height >100 cm), always fix the speaker-system with an appropriate secondary
attachment.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
This speaker-system must never be stacked - Danger to Life due to crashing speaker-systems!
This speaker-system must never be suspended - Danger to Life due to crashing
speaker-systems!
DANGER!
DANGER!
18/26
11036466_V_1_1.DOC

Advertisement

Table of Contents
loading

Table of Contents