ifm
Original Device Manual Fail-safe SmartPLC with EtherNet/IP interface (AC422S), Firmware 4.0.2
Menu
>
6.7.5
Update ifm apps
The user can update an ifm system solution installed on the device by overwriting it with the new
version of the ifm system solution.
Naming convention for ifm apps:
AppName_x.y.z.ifmapp
AppName =
name of the ifm app
x.y.z =
version number of the ifm app
ifmapp =
file extension of an ifm app
To update an ifm system solution:
Requirements:
>
The name of the new ifm app and the installed ifm app must be identical.
>
The version number of the ifm app must be greater than that of the installed ifm app.
To determine the version of the installed ifm app: →
(→ page 149)
1
Download new ifm app
► Download new version of the ifm system solution (→
2
Update the installed ifm app
► Install the new ifm system solution
– Single/basic app: →
– multi app: →
>
6.7.6
Uninstall ifm apps
When a basic app is uninstalled, all dependent multi apps are uninstalled, too.
Before uninstalling an ifm app, the CODESYS standard PLC of AC422S is stopped. After
successful uninstallation, the CODESYS standard PLC is started again.
To uninstall an ifm system solution installed on the device:
1
Display installed ifm apps
Show information about installed ifm apps
►
2
Uninstall ifm app
► In the section of the respective ifm app:
Activate the [Uninstall app] button.
>
CODESYS standard PLC is stopped.
>
The selected ifm app is uninstalled.
>
CODESYS standard PLC is started.
Install single/basic app
Install multi app
(→ page 150)
Show information about installed ifm apps
Notes on ifm system solutions
(→ page 149)
(→ page 149)
2016-03-02
ifm system solutions
6925
(→ page 148)).
7014
151