Sony DVP-S500D Operating Instructions Manual page 7

What cords will I need?
Audio/video connecting cord (supplied) (1)
Yellow
White (L)
Red (R)
Hookups
When connecting the cords, be sure to match the color-
coded cord to the appropriate jacks on the components:
Yellow (video) to Yellow, Red (right) to Red and White
(left) to White. Be sure to make connections firmly to
avoid hum and noise.
pTo listen to the sound through TV speakers
CD/DVD player
R–AUDIO 1–L VIDEO 1
R–AUDIO 2–L VIDEO 2
LINE OUT
pTo listen to the sound through speakers connected to
an amplifier
CD/DVD player
R–AUDIO 1–L VIDEO 1
R–AUDIO 2–L VIDEO 2
LINE OUT
Notes
• Do not connect this
player to a video deck.
If you view the pictures
Yellow
on your TV after
White (L)
making the connections
Red (R)
shown on the right, a
picture noise may
appear.
• Depending on the TV or amplifier, sound distortion may
occur because the audio output level is high. In this case,
set "AUDIO ATT" in "INITIAL SETUP 2" to "ON" in the
setup display. For details, see page 35.
z
If your TV has an S video input connector
Connect the component via the S VIDEO OUT connector
using the S video cable (supplied) instead of the video
connecting cord. You will get a better picture.
TV
INPUT
VIDEO
L
AUDIO
R
z
If you connect the player to a monitor or projector
TV
with component video input connectors that conform
INPUT
to output signals from the COMPONENT VIDEO OUT
(Y, C
VIDEO
Connect the component via the COMPONENT VIDEO
OUT connectors using three video connecting cords (not
L
supplied) of the same kind. You will get a better picture.
AUDIO
R
Amplifier
CD
L
Note
R
Refer to the instructions supplied with the component to be
connected.
Getting Started
Getting Started Playing CDs
Getting Started Getting Started
VCR
CD/DVD
Player
S video cable (supplied)
CD/DVD player
1
2
S VIDEO OUT
/B-Y, C /R-Y) connectors on the player
B R
COMPONENT VIDEO OUT
C / C /
Y
B R
B-Y R-Y
TV
Connect
directly
TV
S VIDEO IN
(Continued)
7 EN