Sony DVP-S500D Operating Instructions Manual page 12

Cd/dvd player
Hide thumbs Also See for DVP-S500D:
Table of Contents

Advertisement

Available languages

Available languages

Basic Operations
Notes
• Depending on the DVD, you
may not be able to do some of
the operations described on the
right.
• When you play back a DVD at
twice the normal speed in
either direction, the sounds of
the picture will come out from
the LINE OUT (AUDIO 1, 2)
connectors. The sounds are
lower than the ones at normal
speed. In this case, no sounds
come out from the DIGITAL
OUT OPTICAL and COAXIAL
connectors. But there is no
sound when you set "MODE"
in "5.1 OUTPUT SETUP" to
"VES A" or "VES B" (page 40).
Notes
• The JOG indicator shows the
mode of the click shuttle close
to the indicator only. When the
indicator on the remote does
not light up, it keeps shuttle
mode on the remote even if the
indicator on the player lights
up.
• If you don't operate the click
shuttle for about 20 seconds
after pressing JOG, it returns to
shuttle mode on the remote.
On the player, it keeps jog
mode.
EN
12
To play at various speeds/frame-by-frame
Using the click shuttle and the JOG button/indicator, you can
playback a DVD with various speed or frame-by-frame. Each time
you press JOG, it changes between shuttle mode and jog mode.
JOG
Click shuttle
p To change the playback speed (Shuttle mode)
Turn the click shuttle. The playback speed changes depending on the turning
direction and angle as follows:
FF2) (about 30 times the normal speed)
<
FF1) (about 10 times the normal speed)
<
2" (about twice the normal speed)
<
PLAY( (Normal speed)
<
SLOW1
(playback direction)
<
SLOW2
(playback direction
<
– slower than "SLOW1
PAUSEP
<
SLOW2
(opposite direction
<
– slower than "SLOW1
SLOW1
(opposite direction)
<
2" (about twice the normal speed : opposite direction)
<
FR10 (about 10 times the normal speed)
<
FR20 (about 30 times the normal speed)
If you turn the click shuttle quickly, the playback speed goes to FF2)/FR20
at once.
p To play the DVDs frame-by-frame changing the playback speed (Jog mode)
1
Press JOG.
JOG lights up during jog mode. When you press JOG on the player, it
becomes pause.
2
Turn the click shuttle.
Depending on the turning speed, the playback goes to frame-by-frame toward
the turning direction of the click shuttle. If you turn the click shuttle with
constant speed for a while, the playback speed goes to slow or normal.
p To return to Continuous Play
Press ·.
Click shuttle
")
")
JOG

Advertisement

Chapters

Table of Contents
loading

Table of Contents