Playing Discs - Sony DVP-NS915V Operating Instructions Manual

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
Example: DVP-NS755V
Power
indicator
[/1
Z
H
1
Turn on your TV.
2
Press [/1.
The player turns on and the power
indicator lights up in green.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
4
5
A
H
[/1
To turn off the player
Press [/1. The player enters standby mode.
z Hint
For DVP-NS915V
The player will turn off automatically whenever
you leave it in stop mode for more than 30 minutes
(Auto Power Off function).
For DVP-NS755V
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set "AUTO
POWER OFF" in "CUSTOM SETUP" to "ON"
(the default setting is "OFF") (page 77).
Super Audio CD audio signals are not output from
the digital jack.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
Press A on the player, and place a
disc on the disc tray.
With the playback side facing down
Press H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 38. For VIDEO CDs,
see page 40.
Note
33
,continued