Center Speaker - Sony DVP-NS915V Operating Instructions Manual

B-2 C-2
• D-PCM (page 79)
D-2
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 79)
13
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
14
Press X/x to select the type of
DTS signal sent to your amplifier
(receiver).
Choose the item that matches the audio
connection you selected on pages 25 to
27 ( through
B
B-2 C-2
• D-PCM (page 80)
D-2
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 80)
15
Press ENTER.
When "DIGITAL OUTPUT" is selected
in step qa
• Quick Setup is finished and
connections are complete.
For DVP-NS915V
• If your AV amplifier (receiver) has an
MPEG audio decoder, set "MPEG" to
"MPEG" (page 80).
When "DIGITAL & 5.1CH OUTPUT" is
selected in step qa
• The Setup Display for "SPEAKER
SETUP" appears.
16
Press X/x to select the size of the

center speaker.

If no center speaker is connected, select
"NONE" (page 81).
OFF
STANDARD
SHARP
DOLBY SURROUND
ON
D-PCM
D-PCM
D-PCM
DTS
).
D
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
To set, press
17
Press ENTER.
"REAR" is selected.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
18
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
"NONE."
"SIDE" and "REAR" refer to the speaker
position relative to your listening
position (page 81).
19
Press ENTER.
"SUBWOOFER" is selected.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
To set, press
To quit press
SETUP DISPLAY
20
Press X/x to select whether or
not you have connected a
subwoofer.
21
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
OFF
LARGE
NONE
NONE
LARGE
SMALL
, then .
ENTER
OFF
LARGE
LARGE
NONE
NONE
LARGE(REAR)
OFF
LARGE
LARGE
LARGE(REAR)
NONE
NONE
, then .
ENTER
YES
,continued
31