Sony DVP-NS915V Operating Instructions Manual page 80

MPEG (DVD VIDEO/DVD-RW only)
(DVP-NS915V only)
Selects the type of MPEG audio signal.
PCM
MPEG
DTS (DVD VIDEO only)
Selects the type of DTS signal.
D-PCM
Select this when the player is
connected to an audio
component without a built-in
DTS decoder. If you play DTS
audio sound tracks, the player
outputs stereo signals via the
DIGITAL OUT (OPTICAL or
COAXIAL) jacks.
DTS
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/16bit The audio signals of DVD
VIDEOs are always converted
to 48kHz/16bit.
96kHz/24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
80
Select this when the player is
connected to an audio
component without a built-in
MPEG decoder. If you play
MPEG audio sound tracks, the
player outputs stereo signals
via the DIGITAL OUT
(OPTICAL or COAXIAL)
jack.
Select this when the player is
connected to an audio
component with a built-in
MPEG decoder.
Notes
• Even if you set "48kHz/96kHz PCM" to "96kHz/
24bit," the sampling frequency is converted to
48kHz/16bit when a "SURROUND" mode (page
57) is selected.
• The analog audio signals from the LINE OUT L/
R (AUDIO) jacks and 5.1CH OUTPUT jacks are
not affected by this setting and keep their original
sampling frequency level.