Replacing The Timing Gears - Volvo 164 1969 Service Manual

Fig . 2-34. Removing the camshaft gear
REPLACING THE TIMING GEARS
VOL VO
103276
1. Empty th e coolant from the system and re move th e
radiator and radiator grill. Remove th e fa'n be l.t
and fan.
2.
Carry out operation s
2- 3
from the pre vious sec-
tion.
3. Remove the timing g'ear ca:sing. Slacken a coupl e
of bo lts extra for the oil sump and observe due
care that the s ump gasket is not damaged.
4. Remove the camshaft nut and pu ll off the cam -
shaft glear with pu ll er SYO
2250,
see Fig' .
2-34.
5. Pu ll off the crankshaft gear w ith puller SYO 2822,
see Fig.
2-35.
Screw out the oil nozzle, blow it c/ean and refit
it, see Fig. 2-38. The gears are lu bricated from
th is nozzle.
6. Refit the crankshaft with too l SYO 2815, see Fig.
2-36.
SYO 2822
Fig. 2-35 . Removing the crankshaft gear
VOLVO
103275
3
SYO 2815
Fig. 2-36. Fitting crankshaft gear
Fig. 2-37. Fitting camshaft gear
2 3
Fig . 2-38. Markings on timing gears
l. Oil nozzle 2. Markings 3. Dowel pin
VOLVO
103 277
VOLVO
103280
VOLVO
103 28 1
2 : 17