Receiver (Amplifier) Hookups - Sony DVP-CX850D Operating Instructions Manual

Receiver (Amplifier) Hookups

This connection is for listening to the sound through
speakers connected to a receiver (amplifier such as an
integrated stereo amplifier, a receiver having a built-in
Dolby Pro Logic decoder, etc.). Refer to the instructions
supplied with the component to be connected.
You can enjoy 5.1 channel surround sound by connecting
a receiver (amplifier) with 5.1 channel inputs. See page
50.
z
You can enjoy surround when connecting front speakers only
You can use 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using actual
rear speakers (VES: Virtual Enhanced Surround). For details, see
page 50.
CD/DVD player
AUDIO 5.1CH OUTPUT
INPUT
FRONT REAR CENTER
L
LINE OUTPUT
R – AUDIO – L
L
R
R
WOOFER
TEURO AV 1 (RGB) - TV
To an AC outlet
: Signal flow
Note
You cannot enjoy the picture with S video signal if your TV is not conformed to the S video signal. When
your TV does not have S VIDEO input, connect the component via the VIDEO INPUT connector using the
video connecting cord (not supplied) instead of the S video cord. For details, see page 9.
Refer to the instructions supplied with your TV.
S VIDEO DIGITAL OUTPUT MEGA
OUTPUT CONTROL
VIDEO OPTICAL COAXIAL
PCM/MPEG/DTS/
DOLBY DIGITAL(AC-3)
iEURO AV 2
To S VIDEO
OUTPUT
To
AUDIO
OUTPUT
Required cords
Audio connecting cord (not supplied) (1)
S video cord (supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
White (L)
Red (R)
To S VIDEO input
Receiver (Amplifier)
To audio input
White (L)
Red (R)
TV
INPUT
VIDEO
S VIDEO
L
AUDIO
R
CD
L
R
11