Controlling The Tv Or The Av Receiver (Amplifier) With The Supplied Remote - Sony DVP-CX850D Operating Instructions Manual

Controlling the TV or the AV Receiver (Amplifier) with the
Supplied Remote Z
If you adjust the remote signal, you can control your TV
with the supplied remote. Default setting is to control
Sony TVs with the g mark.
When you connect the player to a Sony AV receiver
(amplifier), you can also set the input of the receiver
(amplifier) to this player with the supplied remote.
TV/DISC BROWSER/
DVD switch
1
Number buttons
4 5
7
-/--
A
Controlling TVs with the remote
1
Slide the TV/DISC BROWSER/DVD switch to TV.
2
Hold down 1/u (POWER), and enter your TV's
manufacturer's code (see the table) using the
number buttons. Then release 1/u (POWER).
Code numbers of controllable TVs
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
TV.
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote commander, the
code number may reset to 01 (Sony). Reset the appropriate code
number.
1/u (POWER)
2 3
6
8 9
TIME
0
B C D ALL
DVD CD
Manufacturer Code
number
Sony (default) 01
Grundig 11
Hitachi 24
Loewe 45
Nokia 15,16,69
Panasonic 17,49
Philips 06,07,08
Saba 12,13
Samsung 22,23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43
Toshiba 38
71