Oticon Medical Ponto SoundConnector Instructions For Use

Explanation of symbols

CE mark
0413
Manufacturer
Reference number
Batch code
Caution: Federal law (USA) restricts this
Rx ONLY device to sale by or on the order of a
licensed medical practitioner
Consult Instructions for use
Caution
Hand wash
Manufacturer:
Oticon Medical AB
Datavägen 37B
SE-436 32 Askim
Sweden
Phone: +46 31 748 61 00
info@oticonmedical.com
For local office please visit:
www.oticonmedical.com
Instructions for Use
The Ponto Softband and the Ponto SoundConnector are intended for users who
have not had implant surgery, but could benefit from a bone conduction solution.
The Softband consists of an adjustable elastic band (A) with a connector (B) for
the Ponto sound processor. The band has a built-in safety feature (C), which is
designed to open the band if it gets caught. The Ponto Softband is available for
unilateral or bilateral use.
A A
B
Pictures show Softband for unilateral use.
The SoundConnector allows users to use their Ponto sound processor with
alternative headwear. In order to secure the best possible sound transmission,
use headwear with a tight fit.
To allow for correct assembly of the SoundConnector, the material must be
no thicker than 1 mm when compressed. Once attached to the headwear, the
SoundConnector cannot be removed.
Ponto Softband
Ponto SoundConnector
C
™
D