Table Of Contents - Davis Instruments Vantage VUE Installation Manual

Table of Contents

Introduction ........................................................................................................1
Included Components and Hardware .................................................................1
Vantage Vue Sensor Suite Components .................................................1
Hardware ................................................................................................2
Tools Needed ..........................................................................................2
Preparing the Sensor Suite for Installation ........................................................2
Attach the Wind Cups to the Anemometer ............................................3
Attach the Wind Vane ............................................................................3
Install the Rain Collector Tipping Spoon Assembly...............................4
Install the Debris Screen .........................................................................4
Install the Battery ...................................................................................4
Advanced Installations: Confirm the Transmitter ID..............................5
Advanced Installations: Set a New Transmitter ID.................................5
Verify Data from the Sensor Suite .........................................................6
Installing the Sensor Suite .................................................................................7
Choosing a Location for the Sensor Suite ...............................................7
Sensor Suite Installation Guidelines .......................................................7
Mounting the Sensor Suite ......................................................................8
Finishing the Installation ......................................................................10
Maintenance and Troubleshooting ...................................................................11
Appendix A: Specifications .............................................................................14
FCC Part 15 Class B Registration Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment on
and off, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modification not expressly approved in writing by Davis Instruments may void the warranty and void
the user's authority to operate this equipment.
FCC ID: IR2DWW6357
This product (models 6250EU, 6250UK, 6357OV complies with the essential protection requirements of the
Radio Equipment Directive 2014/53/EU. The complete Declartion of Conformity is on our website at
https://www.davisinstruments.com/legal. RoHS Compliant.
3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.
510-732-9229 • Fax: 510-732-9188
IC: 3788A-6357
Integrated Sensor Suite Installation Manual
Rev. H, 5/13/19
Document Part Number: 07395.262
For Vantage Vue Weather Stations and Systems
®
Vantage Vue
Envoy™ are trademarks of Davis Instruments Corp.,
Hayward, CA.
© Davis Instruments Corp. 2019. All rights reserved.
Information in this document subject to change with-
out notice. Davis Instruments Quality Management
System is ISO 9001 certified.
®
, Vantage Pro2™, and Weather
.