Davis Instruments Sensor Mounting Shelf Installation Manual

Sensor mounting shelf for vantage pro

The Sensor Mounting Shelf is for use with the Integrated Sensor Suite (ISS) of

the Vantage Pro

tion sensor and a UV (ultraviolet) sensor. This manual contains instructions for

installing the shelf on the ISS; consult a sensor manual to mount it on the shelf.

OMPONENTS

The sensor mounting shelf includes the following components:

4" Cable Ties

#4 x 3/8"

Self-tapping Screws

Cable Clamps

#4 Flat Washers

E N S O R

H E L F

N S T A L L A T I O N

system. The shelf has mounting provisions for a solar radia-

Sensor Mounting Shelf

#10-24 x 7-3/4" Screws

O U N T I N G

F O R

A N T A G E

A N U A L

#10 Lock Washers

#10 Flat Washers

#10-24 Nuts

Support

Tubes

R O

Product # 6672

Table of Contents

Need help?

Do you have a question about the Sensor Mounting Shelf and is the answer not in the manual?

Page 1 The Sensor Mounting Shelf is for use with the Integrated Sensor Suite (ISS) of the Vantage Pro system. The shelf has mounting provisions for a solar radia- tion sensor and a UV (ultraviolet) sensor. This manual contains instructions for installing the shelf on the ISS; consult a sensor manual to mount it on the shelf.
Page 2 OOLS FOR ETUP Medium Phillips screwdriver LLUSTRATION Here is an illustration of the sensor mounting shelf installed on the ISS: Sensor Mounting Shelf Note: This manual shows installation of the sensor mounting shelf before the two round solar sensors have been attached to it. If you like, the solar sensors can be mounted on the shelf before it is installed on the ISS.
Page 3 5. On the underside of the shelf, ensure that both tube-ends are inside the circular recesses in the shelf. Tighten both screws. Installing the Sensor Mounting Shelf on the ISS OUNTING HELF ON THE Three Holes for Sensor Screws Holes for Support Tube Screws #10-24 x 7-3/4"...
Page 4 Here is an illustration of the shelf after the sensors have been mounted on it. Detailed instructions for attaching the sensors are contained in their manuals. (It makes no difference which sensor is mounted on right/left side of the shelf.) UV and Solar Radiation Sensors Page 4 Sensor Mounting Shelf for Vantage Pro...

Vantage pro6672