ABB LevelMaster 7100 Application Manual page 4

2 Upgrade kit overview
2.1 Upgrade kit contents
The batteryless float upgrade kit (part number 2105820) contains the following:
Qty Description
1 Batteryless float (oil level)
1 Batteryless float (water level)
1 Electronic headboard
2.2 Unpacking and inspecting
Unpack the upgrade kit and inspect for damage and missing or incorrect parts.
IMPORTANT NOTE: If there is any damage to the shipping carton,
keep it and the packing materials until the contents are inspected and
found to be free of damage.
CAUTION – Equipment damage. A static electric discharge can
result in damage to the electronic board. Wear a grounding strap to
eliminate static electricity when inspecting or handling the board.
1. Unpack and inspect each float.
2. Unpack and inspect the electronic board.
IMPORTANT NOTES: The new board (2104836-001) has two
separate ports for both RS485 and power in constrast with the single
port for the older board version (2018546-005).
Make sure the electronic board has two removable terminal connectors
for power and the RS485 communication port. These connectors may
be needed if the existing connection has a single port.
3. Unpack and inspect optional equipment, if purchased.
4. Check for missing, incorrect, or damaged parts. Contact the ABB Representative
to replace missing, incorrect, or damaged parts.
4 | 2105824-001 rev. AA
Table 1: Upgrade kit contents
Part number
2103766-006
2103766-007
2104836-001
Notes
Float Kit part number (includes
only floats): 2018392-017
Firmware version 7.0
Required for batteryless floats