Setting Up The Connection; Usb Connection - Oki OkiPos 441 Software Manual

13.Load a paper roll into the printer, and connect the printer to your computer.
Note
For information about how to load paper and how to connect the printer
to your computer, refer to the OKIPOS 441's hardware manual. To view
the manual, click Document at the Autorun menu, then select Hardware
Manual from the document list.

Setting up the Connection:

> For USB Connection, see "USB Connection" immediately below.
> For Parallel (LPT1) Connection, see "Parallel Port Connection" on
page 11.

USB Connection

1. Turn on the printer.
The Windows plug-and-play feature detects the connection of the printer hardware and
automatically installs the driver software.
The Found New Hardware popup appears briefly at the bottom right of the Windows
desktop to indicate that system had detected the new hardware.
2. From the Windows Start menu, select Printers and Faxes and confirm that OKIPOS
441 Cutter appears in the folder. (Note that the actual display will vary according to
the specific type of printer connected.) If the printer is displayed, the installation is
finished.
10 • Installing Software, Windows 2000 and Windows XP