Dual Channel Watch Select; Other Functions; Confi Guration - Eu; Pl; D, Ec; Uk (Config. Set Mode) - M-tech LEGEND II PLUS User Manual

OTHER FUNCTIONS

4.9 Dual channel watch select

① Select the sub channel to monitor or communication.
② Switch DW mode select switch to ON, the channel display will
flashing.
③ Change the channel to be sub channel during the channel
display flashing.
④ Press
[PTT]
confirmation.
⑤ The radio will scan every 1 sec. for each the main and the sub
channel.
Press will be use main channel to transmit. It can transmit by sub
[PTT]
channel within 3 sec. after received signal from sub channel
5.1 Configuration - EU; PL; D, EC; UK (CONFIGURATION SET MODE)
The frequency bands have to be chosen according to the country
of use.
① Switch the Function mode select switch to F.
② Turn power ON, then
③ Turn the channel selector on the device or push
microphone to select desired configuration.
④ Push
[PTT]
switch to OFF to restart the radio.
NOTE:
Don't use any other configuration. Some countries need an
user's license.
14
or wait 5 sec. after select the sub channel for
CONFIGURATION SET MODE
key to set other items or switch the Function mode select
is displayed.
/ keys on the
[UP] [DN]