Wireless - Billion BiPAC 7404V(G)OX User Manual

Wireless

Parameters
WLAN Service: Default setting is set to Enable. If you do not have any wireless, both 802.11g
and 802.11b, device in your network, select Disable.
Mode: The default setting is 802.11b+g (Mixed mode). If you do not know or have both 11g and
11b devices in your network, then keep the default in mixed mode. From the drop-down manual,
you can select 802.11g if you have only 11g card. If you have only 11b card, then select 802.11b.
ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from
another. For security purpose, change the default wlan-ap to a unique ID name to the AP already
built-in to the router's wireless interface. It is case sensitive and must not excess 32 characters.
Make sure your wireless clients have exactly the ESSID as the device, in order to get connected to
your network.
Note: It is case sensitive and must not excess 32 characters.
ESSID Broadcast: It is function in which transmits its ESSID to the air so that when wireless
client searches for a network, router can then be discovered and recognized. Default setting is
Enabled.
Disable: If you do not want broadcast your ESSID. Any client uses "any" wireless setting
cannot discover the Access Point (AP) of your router.
Enable: Any client that using the "any" setting can discover the Access Point (AP).
Regulation Domain: There are seven Regulation Domains for you to choose from, including
North America (N.America), Europe, France, etc. The Channel ID will be different based on this
setting.
Channel ID: Select the wireless connection ID channel that you would like to use.
40