Billion BiPAC 7404V(G)OX User Manual page 115

Configuring L2TP VPN in the Office
The input IP address 192.168.1.200 will be assigned to the remote worker. Please make sure this
IP is not used in the Office LAN.
Function
Name
Connection Type
Type
IP Address (or
Hostname)
Username
Password
Auth. Type
IPSec
Authentication
Encryption
Perfect Forward
Secrecy
Pre-Shared Key
Example: Configuring your Router to Dial-in to the Server
Currently, Microsoft Windows operation system does not support L2TP incoming service.
Additional software may be required to set up your L2TP incoming service.
VPN_L2TP
Remote Access
Dial out
69.121.1.33
username
123456
Chap (Auto)
Enable
MD5
3DES
None
12345678
Description
Give a name of L2TP Connection
Select Remote Access from the Connection Type
drop-down menu
Select Dial out from the Type drop down menu
A Dialed Server IP
An assigned username and password
Keep this as the default value for most cases
Enable this to enhance your L2TP VPN security
Both sides should use the same value
110