Adjusting The Sound Characteristics; Quickly Attenuating The Sound - Sony CDX-M1000TF Operating Instructions Manual

Changing the operative direction
The operative direction of controls is factory-set
as shown below.
To increase
To decrease
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for 2 seconds while
pushing the VOL control.
Note
If you press (SOUND) for 2 seconds while pushing the
VOL control, "Normal" or "Reverse" appears in the
display.
– "Normal" is to use the rotary commander at the
factory-set position.
– "Reverse" is to use the rotary commander when it is
mounted on the right side of the steering column.
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press (SOUND).
3
Press < or , repeatedly to select the
item you want to adjust.
Each time you press < or ,, the item
changes as follows:
y
DSO EQ7 y Bass y Treble
y Balance (left-right)
y Fader (front-rear)
y SubWoofer (subwoofer volume)
4
Press (ENTER).
5
Adjust the selected item by pressing
< or ,.
6
Press (ENTER).
Quickly attenuating the
sound
Press (ATT).
"ATT" appears in the display for a while.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
29