Auto Mode Setting - Mitsubishi MA Series Technical Manual

4.2.2 Auto Mode Setting

The following settings can be made.
ON (default) : Auto mode is displayed when selecting an operation mode only if the unit to be connected supports the auto
mode.
However, this does not apply if the unit to be connected does not support the auto mode.
Operation mode can be switched:
COOL
OFF : Even if the unit supports the auto mode, auto mode is not displayed when selecting an operation mode.
Operation mode can be switched :
COOL
How to Set Auto Mode
MODE
(1) While pressing the
function selection mode.
(2) Press the MODE button to select
CHANGE
[Display ]
LANGUAGE
(3) Press the MENU
* The current setting is displayed.
ON/OFF
(4) Press the
SELECT
[Display ]
AUTO MODE
MODE
(5) While pressing the
now complete.
ON/OFF
* If you press the
16
DRY FAN
DRY FAN
■ Display ex am ple
button, press the
FUNCTION
on the screen (at
SELECTION
FUNCTION
SELECTION
SELECT
button so that appears on the screen (at
AUTO MODE
button to select whether auto mode is to be used (on) or not (off).
SELECT
AUTO MODE
button, press the
button before the
AUTO HEAT
HEAT
ON/OFF
button for two seconds to activate the remote controller's
).
MODE DISP MODE
SELECTION SETTING
).
ON/OFF
button for two seconds to return to normal mode. Setting is
MODE
button, the settings you have made will be cancelled.