Deepace KC901M User Manual page 6

Step 2: pull the keyboard side of the shell and slide it 2cm out from the bottom
(Chart 1-2). To do it, your fingers must hold the two sides of the shell hard and pull
the RF adapter out at the same time. If it gets stuck, you can knock the bottom on the
lower shell lightly. DO NOT knock it too hard; the maximum sliding distance is 4cm, if
taken beyond this distance,, the inner cables will break.
Step 3: lift the upper shell slightly, and then turn it around to the left side.
Step 4: Install the batteries so that the positive poles are pointing toward the RF
adapter. If there are only two batteries being installed, please install them separately
to the most left side and the most right side. (Chart 1-3)
Chart 1-1
Chart 1-2
- 5 -