Henny Penny MPC-1L Technical Manual page 18

3-7. MPC-554 LINER/HEATER
ASSY. REPLACEMENT
(Continued)
Figure 4
Figure 5
Figure 6
July 2011
7. Using a 5/16" socket or wrench, remove the 5 nuts on the
rear of the front panel. Figure 4.
8. Using a
1/8" drill bit,
bottom of the front panel and then remove front panel from
unit. Figure 5.
9. Remove the screws securing the liner(s) to the liner
supports. (The lower screws too, if the lower liner
assembly is to be replaced.) Figure 6.
3-7
Model MPC-1L, MPC-22, MPC-554
drill-out the pop-rivets securing the
FM06-038-B