Result
Note
Siemens
Building Technologies
8. Click OK to start.
The plant diagram is finished.
The bus device or plant can now be operated and monitored via the web-based
plant diagram. The default display is as follows:
• Operating values (e.g. operating mode Auto, Comfort, etc.) is displayed in red.
The cursor changes to a hand symbol when you move it over the display. Click
to open the applicable settings dialog box.
• Set points are displayed in orange; actual values in white.
For reasons of compatibility and regardless of the user level, individual data points
for the bus device may not be mapped to the plant diagram.
• The data point text "Data point not found" is displayed.
• Three question marks "???" are displayed as the data point value.
See Section 4.6 for any post editing.
Web server
Visualize plants
61 / 102
CE1C5712en
06.06.2011