Siemens OZW672 Series Commissioning Instructions page 67

Notes
Siemens
Building Technologies
A router normally serves as the DHCP server if installed on a local area network
(e.g. DSL router for Internet access). As such, it automatically assigns IP ad-
dresses to all participants that are DHCP clients. The PC automatically receives the
IP addresses and the subnet mask if connected to the router via Ethernet. You can
get the information on the PC:
1. Select Start > Control Panel > Network Connections > Local Area Connection
2. Select "Support" tab.
3. Click Details...
In the example, the PC is assigned the IP address
192.168.2.1. The default gateway and DNS server have IP address 192.168.2.1.
You can use the data to set the web server:
• IP address: Unused address on the subnet. For example
available if the PC uses
• Subnet mask:
255.255.255.0
• Default gateway:
192.168.2.1
• Preferred DNS server:
• Alternate DNS server (empty).
• In the example, the subnet has an address of 192.168.2.x. Devices must have
the same subnet address to communicate directly (i.e. without a router).
• The web server IP address must be entered manually. The web server cannot
be configured as a DHCP.
• We recommend using IP addresses from the private range in the home network
(see Section 6.2.1).
Web server
Communications
192.168.2.199 and the router uses 192.168.2.1.
192.168.2.1
192.168.2.199
and subnet mask
192.168.2.10 is still
CE1C5712en
67 / 102
06.06.2011