Krups XP2240 Manual page 15

English
To descale your coffee maker, you can use:
- either a sachet of descaler from the stores diluted in 250ml of water
- Or 250 ml of white vinegar available from hardware stores.
n Pour the descaler or vinegar in the water compartment and turn the coffee maker on (without filter
and without ground coffee).
n Let half of this mixture run through into the jug then turn the appliance off by pressing the "On / Off"
button.
n Leave for one hour.
n Turn the appliance back on by pressing the "On / Off" button and let the rest of the water run through.
n Rinse the coffee maker by running two jugs of fresh water through.
The guarantee does not cover coffee makers that do not work properly or do not work at all
because they have not been descaled.
IN CASE OF PROBLEM:
Problems
The coffee maker does not come on:
There seems to be a leak:
The water takes too long to run
through or the appliance makes exces-
sive noise:
Your appliance still does not work?
-
END OF LIFE ELECTRICAL AND ELECTRONIC PRODUCT
Environmental protection first!

Your appliance contains valuable materials which can be recovered or recycled.

Leave it at a local civic waste collection point.
If you have any product problems or queries, please contact our Customer Relations Team first for expert
help and advice:
Helpline:
0845 602 1454 - UK
(01) 677 4003 - ROI
web site: www.krups.co.uk
12
Solutions
Check the connection
Make sure the water tank was not filled beyond the
limit
Descale your appliance.
Contact a Krups approved service centre.