Presetting Dab Services Automatically (Btm) - Sony CDX-C90R Operating Instructions Manual

Presetting DAB services
automatically
The BTM (Best Tuning Memory) function picks out DAB ensembles and
automatically assigns the services within the ensembles to preset service numbers.
The unit can preset up to 40 services.
If services have been previously set, the BTM function operates under the following
conditions:
• If you activate the BTM function while listening to a
preset service, the unit will store detected services
(by overwriting) only to preset numbers higher
than that of the current present service.
• If you activate the function while listening to a
service that is not preset, the unit will replace the
contents of all preset numbers.
• In both cases above, if the unit detects a service that
is identical to one already preset, the previously
stored service remains unchanged and the newly
GB
detected service is not preset.
Note
If the unit can only tune
in a few services, the
BTM function may not
assign services to all the
preset service numbers.
Tip
Each time you press
DSPL/PTY for two
seconds, the function
menu switches as
follows:
$
TA/WTHR/NEWS
$
AF/TA/TIR
$
BTM/LINK
$
DVOL/EL
50
DAB
(BTM)
1
While listening to a DAB programme, press
and hold DSPL/PTY for two seconds to display
BTM/LINK.
2
Press BTM.
Selecting the mode with the wireless remote
While listening to a DAB programme, press MENU and set
the Preset mode in the R.mode to "BTM."
DSPL/PTY
PTY DSPL OPEN
B T M
L I N K
6 7 8 9 10
BTM