Adjusting The Fader (Fad); Adjusting The Volume Of The Subwoofer(S) - Sony CDX-C880R Operating Instructions Manual

Adjusting the listening position
1
Press (SOUND) for two seconds.
2
Press (SOUND) repeatedly until the
desired listening position appears.
3
Press (5) ( n).
4
Rotate the dial to adjust the centre of
the sound field to the left or right. Then
set the centre of the sound field.
Centre moves to the L (left).
Centre moves to the R (right).
5
Press (5) ( n).
6
Rotate the dial to adjust the centre of
the sound field to the front or rear.
Centre moves to the R (rear).
Centre moves to the F (front).
7
Press (SOUND) for two seconds.
When the effect setting is complete, the
normal playback mode appears.

Adjusting the fader (FAD)

Normally, with the DSP mode on, the volume
of the output sound from the rear speakers is
lowered automatically to improve the
efficiency of the listening position setting. If
you want to raise the rear speaker volume,
adjust the fader.
1
Follow steps 1 to 3 of "Selecting a
surround menu" (page 35).
2
Press (SOUND) repeatedly until "FAD"
appears.
3
Rotate the dial to adjust the fader.
Decreases front speaker volume
Increases front speaker volume
After three seconds, the display returns to
the normal playback mode.
Adjusting the volume of
the subwoofer(s)
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (SOUND) repeatedly until "SUB"
appears.
3
Rotate the dial to adjust the volume.
After three seconds, the display returns to
the normal playback mode.
Tip
When you rotate the dial to turn the volume all
the way down, "Sub ATT" appears and the cutout
frequency of the subwoofer is disabled.
continue to next page n
EN
37