Locating A Disc By Name; List-Up; Selecting Specific Tracks For Playback; Bank - Sony CDX-C560 Operating Instructions Manual

Locating a disc by name

— List-up (CD changer with custom file
function or MD changer)
You can use this function with discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 12).
1
Press (LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
DISC
1
SUR EQ
ENTER
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• Once a disc name has been displayed for five seconds, the
display goes back to its normal playback mode. To turn
off the display, press (DSPL).
• The track names are not displayed during MD playback.
• If there are no discs in the magazine, "NO DISC"
appears in the display.
• If a disc has not been assigned a custom file, "********"
appears in the display.
• If the disc information has not been read by the unit,
"NOT READ" appears in the display. To load the disc,
first press the number button, then choose the disc that
has not been loaded.
• The information appears only in upper case. There are
also some letters which cannot be displayed (during MD
playback).
Selecting specific tracks
for playback

— Bank

(CD changer with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (3) (PLAY MODE) for two
seconds.
Bank edit mode
CD2
DISC TRACK
5 1
SUR EQ
PLAY MODE ENTER
Note
If you have not labeled the disc, the bank edit mode
does not appear and the program edit mode appears. To
go back to the normal playback mode, press (SHIFT).
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (5) (ENTER).
CD2
DISC TRACK
5 3
SUR EQ
PLAY MODE ENTER
The indication changes from "PLAY" to
"SKIP." If you want to return to "PLAY,"
press (5) (ENTER) again.
3
Repeat step 2 to set the "PLAY" or "SKIP"
mode on all the tracks.
4
Press (3) (PLAY MODE) for two seconds.
The unit returns to the normal CD playback
mode.
5
Press (SHIFT).
Notes
• You can set the "PLAY" and "SKIP" mode on up to 24
tracks.
• You cannot set the "SKIP" mode on all the tracks.
Playing the specified tracks only
You can select:
• BANK-ON to play the tracks with the
"PLAY" setting.
• BANK-INV (Inverse) to play the tracks with
the "SKIP" setting.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
"BANK" appears.
2
Press (4) (n) repeatedly until the
desired setting appears.
z BANK-ON z BANK-INV
CD2
BANKON
SUR EQ
PLAY MODE
Playback starts from the track following the
current one.
3
Press (SHIFT).
To go back to the normal playback mode,
select "BANK-OFF" in step 2 above.
z BANK-OFF
BANK
EN
13