Water Tank - Oliso smartiron TG1050 User Manual

step 1
switch o unplug iron
If you need to add water during ironing, unplug the iron and repeat the above
max fill line
MAX
DO NOT
Fill the tank past the MAX fill
line on the side of the iron.
Close the port when done.
filling water tank
steps. After filling, make sure the iron is fully reheated before ironing.
alternative filling
Alternatively, fill directly from a
faucet holding the iron horizontally.
Make sure iron is unplugged.
step 2
open port
step 3
fill (cup included)
Two fill cups equal the max
capacity of the water tank.
water
recommendations
This iron is designed to be
used with regular tap water.
If your water is over 12 grams
of hardness, we recommend
using either inexpensive
bottled spring water or
mixing half tap water with
half distilled water.
NEVER USE
100% distilled water
as this can cause the
iron to spit and leak.
7