Breville The Bbq Grill - Breville 800GR Instruction Booklet

Hide thumbs Also See for 800GR:
Table of Contents

Advertisement

OPERATING yOUR BREvILLE THE BBQ GRILL™
TO USE AS A SANdWICH PRESS
1.
Insert the plug into a 230/240V power
outlet and switch the power on. Switch
the ON/OFF button to ON. The red
heating light will illuminate.
2.
Ensure the removable drip tray is
correctly inserted and positioned back
into the appliance.
3.
Ensure the top plate is in the closed
position for more efficient preheating.
4.
Turn the base plate tilt dial to the
FLAT position.
5.
Turn the variable temperature dial to the
SANDWICH position.
6.
Allow the grill to preheat until the red
heating light goes out.
7.
During this time, prepare the sandwich
and place it onto the base plate. Always
place sandwiches towards the rear of the
base plate.
8.
Use the handle to close the top plate.
The top plate has a floating hinge
system that is designed to press down
evenly on the sandwich. the grilling
height control on the right hand side
of the top plate is used to adjust for the
thickness of the sandwich. The levelling
handle on the right hand side of the top
of the grill may be used to even out the
top plate.
NOTE
Always allow the grill to preheat until
the red heating light goes out.
9.
Toasting should take approximately
5–8 minutes. Exact toasting time will
be a matter of preference. It will also
depend on the type of bread and filling
used.
800GR_IB_A12_FA.indd 11
10.
When the sandwich is cooked, use the
handle to open the top plate. Remove the
sandwich using a plastic spatula. Never
use metal tongs or a knife as these can
cause damage to the non-stick coating of
the cooking plates.
WARNING
Fully unwind the cord from the cord
storage facility before use.
USING THE AdjUSTABLE GRILLING
HEIGHT CONTROL FEATURE
This allows your grill to be used as an open
toaster, ideal for toasting open sandwich
style 'melts'. It can also be used to grill
delicate ingredients such as fish and
hamburger buns without squashing.
1.
Allow the grill to preheat until the red
heating light goes out.
2.
Place the food to be grilled on the
base plate.
3.
Move the adjustable grill control clip
on the right hand side of the grill to the
desired height.
4.
Slowly lower the top plate, using the
levelling handle on the top right-hand
side of the plate, until it rests in the
appropriate position above the food.
11
24/02/12 7:44 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents