Microphone Mixing - Aiwa NSX-V50 Operating Instructions Manual

1
Ivllc 1 _Mlc2_
2
DECK112 BAND
b
4
MIC
"""-
@
MIN* MAX
5
DIGITAL
'c'-
@
MIN. MAX
MICROPHONE MIXING
Two microphones can be connected to this unit, allowing you to
sing along to music sources.
Use a microphone with a mini plug (03.5 mm,
1/8
inches).
NSX-V51 G: Microphone is supplied.
NSX-V50/V52/V54: Microphone is not supplied.
Before connecting a microphone
Set the MIC MIXING control to MIN.
1
2
3
4
5
Connect your microphone(s) to the MIC 1 or MIC
2 jack.
Press one of the function buttons to select the
source to be mixed, and play the source.
Adjust the volume and tone of the source.
Adjust the microphone volume with the MIC
MIXING control.
The volume of both microphones is adjusted simultaneously.
Adjust the echo with the DIGITAL ECHO control.
To record microphone sound mixed with source sound
Follow the procedure for recording from the source (pages 36 to
38).
The SYNC DUB button cannot be used for mixing recording.
When not using the microphones
Set the MIC MIXING and DIGITAL ECHO controls to MIN and
remove the microphones from the MIC jacks.
m
When a connected microphone is used, the FRONT
SURROUND system is automatically canceled.
If the microphone is held too near the speakers, a howling sound
may be produced. In this case, hold the microphone away
from the speakers, or decrease the sound level using the MIC
MIXING control.
If sound through the microphone is extremely loud, it may be
distorted. In this case, turn the MIC MIXING control toward
MIN.
Recommended microphone
The use of a unidirectional type microphone is recommended to
prevent howling. Contact your local Aiwa dealer for details.
48