Yamaha CS-700 Operation Manual page 99

Property Type
voip.codec3 INDEXED_
OPTION
voip.codec4 INDEXED_
OPTION
voip.codec5 INDEXED_
OPTION
voip.ptime NUMBER
voip.mwi BOOLEAN
voip.vm-number TEXT
voip.do-not-disturb BOOLEAN
voip.auto-answer NUMBER
Values
0 : None
1 : G.722
2 : G.711 u-law (PCMU)
3 : G.711 A-law (PCMA) )
4 : G.726
5 : G.729
0 : None
1 : G.722
2 : G.711 u-law (PCMU)
3 : G.711 A-law (PCMA)
4 : G.726
5 : G.729
0 : None
1 : G.722
2 : G.711 u-law (PCMU)
3 : G.711 A-law (PCMA)
4 : G.726
5 : G.729
10..60 : ptime interval in ms
0 : Disable MWI signaling
1 : Enable MWI signaling
VoIP voicemail number.
0 : Disable DND
1 : Enable DND
0 : Disable auto-answer
100..699 : RESPONSE to send
when answering
Default Value Description
3 Third highest prioritized codec. At least one codec different from
"None" has to be selected in voip.codec1-voip.codec5.
4 Fourth highest prioritized codec. At least one codec different from
"None" has to be selected in voip.codec1-voip.codec5.
5 Lowest prioritized codec. At least one codec different from "None"
has to be selected in voip.codec1-voip.codec5.
20 The ptime (packetization interval) value for a codec determines
the length of time in milliseconds represented by the media in an
RTP packet which is used to transmit audio traffic. The valid range
is 10 to 60 in 10 ms increments.
0 Enable displaying the message waiting indicator (MWI) on the
device and enable receiving message waiting notifications from
the PBX. The PBX must be configured to support voice mail for the
registered user in order for this feature to work properly.
The number that is dialed when voicemail is called from the UI.
0 Configure do-not-disturb (DND) setting.
0 Auto answer incoming VoIP calls. We recommend enabling this
feature only for test purposes. If the phone is set to Do Not
Disturb or if there are no available lines, the Forward rules will
apply. If there are no Forward rules specified, the incoming call will
be sent to voice mail. If voice mail is not supported, the call will be
rejected.
99