Yamaha CS-700 Operation Manual page 116

usb
bt
call-status
VoIP Calls
idle
incoming
calling
failed
connected
onhold
connected-in-
conf
disconnected
update
missed
USB Calls
active
idle
incoming
inactive
onhold
connected-in-
conf
BT Calls
active
Idle
incoming
inactive
onhold
connected-in-
conf
Format Examples:
get status 1
val status 1 connected
notify call.status 1 connected
Supported Products: CS700-AV, CS700-SP
status-all
Description: Query all call status. See "call-status" property for description of status types. Status
information on VoIP lines is only provided in the –SP and –DS version of the CS-700
product.
Property Actions: get
Command Definition:
Action Definition
USB line
Bluetooth line
String as shown below for each call type.
Initialization state.
Receiving incoming VoIP call.
Initiating outgoing VoIP call.
Outgoing call attempt failed; it is followed by "disconnected" when the attempt is
disconnected.
Call is connected.
Call is on hold.
Call is in a conference.
Not in a call or phone is not registered.
The call is transferred by the far end (with some call managers the call state will remain
"connected" after the transfer).
Incoming VoIP call missed due to Do-Not-Disturb.
USB audio is active.
Initialization state.
Incoming USB call signal is received from host.
USB audio is not active.
USB audio is on hold.
Call is in a conference.
BT audio is active.
Initialization state.
Incoming BT call signal is received from connected phone.
BT audio is not active.
BT audio is on hold.
Call is in a conference.
116